Your Company Name

Patio Heater >>Pilot won’t light >> Cause>>Pilot flame not touching thermocouple

Solution

Low gas pressure or pilot blockage, or Clean pilot.

1)Remove the 4 screws that hold the Emitter top to the Emitter base

2) Remove Emitter top with Reflector

3) Clean pilot assembly by using either a can of compressed air or air compressor

4) Blow out any debris that has been accumulated inside of the pilot hole that located on the front of the emitter base

5) Remove the gas collector screw

6) Clean pilot by using a can of compressed air or air compressor